Which furnace?

Discussion in 'Other Equipment' started by Robert Squire, Dec 14, 2017.

  1. Robert Squire

    Robert Squire Active Member

    If your only two choices for a sintering furnace are a Shenpaz Sintra, or a Naber Therm LB, which would you choose and why?
     
  2. French Cadman

    French Cadman Administrator Staff Member

    Shenpaz for me !
    I already have ceramic furnace Shenpaz since 15 years !

    When I bought the Mighm Voght 4 years ago , I didn't have money for the Shenpaz and I regret a lot ....

    ;-)
     
    Last edited: Dec 14, 2017
    Robert Squire likes this.
  3. Robert Squire

    Robert Squire Active Member

    Thanks, my 15 year old Shenpaz Focus has been one of the best ceramic furnaces that I've ever had. I hope that their sintering furnace does as well, because it's time to decide today.
     
  4. Ryan

    Ryan New Member

    Mihm Vogt are also great ovens!
     
  5. DMC

    DMC Scott Hudson

    $2400 for a new furnace with a couple extra elements.

    You can try for a couple weeks. If not happy then send back.

    If you like, then pay. Can ship today.

    We always have them in stock and any spare part.

    Replacement elements less than $80 each.

    Have sold over 100 of them and same that I have used.

    I have owned Four Nabertherms and gave them away.

    A box with insulation....One transformer, couple wires.

    You think that should cost more than a new Motorcycle? :confused:

    Not only do they work, but you will make money using them.

    Many people buy things and loose money or waste money. I prefer not to do that.
     
  6. Zdental

    Zdental Member

    @DMC

    only US or would you send to Norway?
     
  7. DMC

    DMC Scott Hudson

    Sure.
    We shipped to Switzerland couple weeks ago.
    Can ship today if you want?
     
  8. Zdental

    Zdental Member

    Can you send me some information about the set. Will talk to my partner. Is it a timelimited auction?
     
  9. DMC

    DMC Scott Hudson

    No, I always have furnaces.

    Take your time!
     
  10. Zdental

    Zdental Member

    Hey Scott, you got me a webpage or some kind of flyer about your sintering furnace! Would like to read something about it Best regards from Norway
     
  11. 2thm8kr

    2thm8kr ɹotɐɹʇsıuıɯqA Staff Member

    Shouldn't you be sleeping at this hour??
     
  12. Zdental

    Zdental Member

    Not when i‘m on vacation :D
     
    2thm8kr likes this.
  13. Zdental

    Zdental Member

  14. Zdental

    Zdental Member

    Hey Scott,
    the 2400$ for the 100*100?
    How much for the 200*200?
    What is the max themperature? Hope it‘s higher than the 100C from the pic ;)
     
  15. ceramart

    ceramart New Member




    you still have that price, I sent you PM several days ago
     
  16. ceramart

    ceramart New Member

    you still have that price, I sent you PM several days ago
     
  17. DMC

    DMC Scott Hudson

    We have furnaces....always.
    Because Trump change some taxes, we charge a little bit more now.

    $2800 USD

    +01-804-285-0777

    Or email mroberts (at) 3d-dental d0t c0m
     
    biodentg likes this.
  18. jlorie

    jlorie New Member

    Hi Scott,

    What is the highest temperature these furnaces go to?
     
  19. DMC

    DMC Scott Hudson

    More than enough. 1700c is max.
    I do not recommend raising temps above manufacturers instructions. You will NOT have better looking zirconia!

    1530 is the highest you should be baking any zirconia IMO
     
  20. basler

    basler New Member

    Scott I got one of your furnaces from a lab that haven`t used it in a long time .I followed the instructions in the manual to set the program .
    Now the program goes as is should but the oven tis not heating up, the temperature stays the same .

    Any advice?
     

    Attached Files:

Share This Page